Liquid applied waterproofing for concrete?

Liquid-applied waterproofing can be applied to a prepared substrate using ALLESDICHT liquid rubber. Depending on the area, it may be painted on, brushed on, trowelled or sprayed; airless spray equipment is used for spraying. The liquid-applied waterproofing is ready to use and requires only thorough stirring before application. ALLESDICHT adheres to almost all standard construction substrates, including concrete, timber, bitumen, tiles and metal. The substrate must be sound, clean and dry, and free from dust, oil and grease. Highly absorbent surfaces require a primer beforehand.

The waterproof coating is applied in two to three coats, with each subsequent coat applied only after the previous one has dried completely. A wet coat must not exceed 1.5 mm; the finished rubber membrane has a thickness of at least 2 to 3 mm. Mesh reinforcement is incorporated at junctions and penetrations. Once dry, the liquid membrane forms an elastic, waterproof rubber membrane with elongation of over 200%, allowing it to accommodate movement in the substrate.