Acoustic tile FS "Brick red"

12,50 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
50,00 € / 4 piece / m²
(6,40 kg / piece)

EAN: 4251469338630 | Item no.: 3863

The handy acoustic tiles quieten every kind of vibrations, i.e. structure-borne noise, impact noise and airborne noise. They can be laid as a base below the appliances, machines and devices, so that they effectively decouple them from the ground below, e.g. a storey ceiling.

They can be also used as an interior wall panelling (with the frustums oriented to the noise source) for housings - due to the favourable shaping and formulation they are able to quieten also the arising airborne noise.

The acoustic tiles are pasted with the flat side on the wall surface or on a base plate (plywood, galvanised sheet metal, etc.). With some hidden hooks, the base plate can be removably hung on a wall. The acoustic tiles are not directly screwed on.

The product data sheet to print

Acoustic tile von WARCO im Farbdesign Brick red mit den Abmessungen 500 x 500 x 45 mm. Produktfoto von Artikel 3863 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 3863, Acoustic tile, Format 500 x 500 x 45 mm, Farbe Brick red.

Großaufnahme vom Verbindungssystem von WARCO-Boden 3863 - Acoustic tile im Farbdesign Brick red. Abmessungen 500 x 500 x 45 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3863 - Acoustic tile im Format 500 x 500 x 45 mm.

Typische Verlegung oder Einbausituation für den Artikel 3863 von WARCO - Acoustic tile, Farbton Brick red in der Abmessung 500 x 500 x 45 mm.

Brick red (active)
Anthracite - 0,50 €
Chocolate brown + 0,50 €
Grass green + 0,50 €
Slate grey + 0,50 €

Format 500 x 500 x 45 mm

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - in the open air and in buildings

For applications in the open air and under roof. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Brick red

In the colour brick red, the black rubber granulate (SBR) from the car tyres is mixed with a binder, into that a brick red colour pigment (iron oxide) was mixed. The black car tyre rubber granules are coated with the brick red colour. Brick red is a colour hue that can be found for hundreds of years in construction materials for roofs, walls and floors. According to this viewing habit, brick red products can be mounted almost everywhere.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 28 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound base course or on a plastic honeycomb grid. Please take note of the laying instruction.

Compressive point-load strength

3 / 5

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances.

In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.