Fall protection mat (90 cm fall height) FS "Anthracite"

39,10 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
39,10 € / 1 piece / m²
(19,50 kg / piece)

EAN: 4251469356566 | Item no.: 5656

The large-sized fall protection mat can be successfully used in case of large surfaces protected against weather effects. The fall protection mat, tested according to EN 1177 for a fall height of 90 cm, belongs to the basic equipment of the indoor playgrounds and climbing halls. Wherever children or adults can fall up to a drop height of 90 cm, this fall protection mat provides a permanent, maintenance-free and carefree fall protection.

The reasonably priced fall protection mat is also slip-resistant. It feels pleasantly warm to the touch and insulates against vibrations and noise.

The product data sheet to print

Fall protection mat (90 cm fall height) von WARCO im Farbdesign Anthracite mit den Abmessungen 1000 x 1000 x 30 mm. Produktfoto von Artikel 5656 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 5656, Fall protection mat (90 cm fall height), Format 1000 x 1000 x 30 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 5656 - Fall protection mat (90 cm fall height) im Farbdesign Anthracite. Abmessungen 1000 x 1000 x 30 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 5656 - Fall protection mat (90 cm fall height) im Format 1000 x 1000 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 5656 von WARCO - Fall protection mat (90 cm fall height), Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.

Anthracite (active)
Brick red + 2,60 €
Grass green + 5,40 €
Chocolate brown + 5,40 €
Slate grey + 5,40 €

Format 1000 x 1000 x 30 mm

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

90 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 90 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

Lateral Connecting Pins - Plastic Dowels

On two sides - between the individual rows of tiles - the tiles are connected with side connecting pins (plastic plugs). The installation must be staggered, i.e. the rows of tiles are staggered by half a tile and the edges of one tile are aligned with the centre of the tile below (T-joint). In this staggered pattern, each tile is connected to 2 tiles in the row above and 2 tiles in the row below by connecting pins. These pins prevent the tiles from moving sideways, but do not prevent them from drifting apart along the longitudinal axis of the plastic plugs. For this reason, the tiled surface must be enclosed by walls or recessed kerbs.

Structure of the underside

The underside of the slab features an inverted pyramid toe structure. These pyramid studs, approximately 15 mm high, are designed to enhance the weather resistance, dimensional stability and shock absorption properties of the slab, while facilitating efficient water drainage for outdoor use. The tiles can be installed on solid substrates (concrete, asphalt, interlocking paving, tiles, etc.), roofing membranes or plastic lawn grids. Installation guidelines must be followed.