Fall protection tile (210 cm fall height) FS "Anthracite"

20,70 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
82,80 € / 4 piece / m²
(7,20 kg / piece)

EAN: 4251469355880 | Item no.: 5588

With the proven fall protection tile, you take no risks on the playground, under playground equipment or in front of the climbing wall. Because the fall protection tile, which has been tested according to EN 1177 for a fall height of 210 cm, provides lasting and maintenance-free protection against injuries from falling.

Obviously, the fall protection tile is extensively water-permeable, weatherproof, frost-resistant and slide-blocking. It can be used both indoors and outdoors. The handy tiles are laid in a half-offset pattern. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Fall protection tile (210 cm fall height) von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 65 mm. Produktfoto von Artikel 5588 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 5588, Fall protection tile (210 cm fall height), Format 500 x 500 x 65 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 5588 - Fall protection tile (210 cm fall height) im Farbdesign Anthracite. Abmessungen 500 x 500 x 65 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 5588 - Fall protection tile (210 cm fall height) im Format 500 x 500 x 65 mm.

Typische Verlegung oder Einbausituation für den Artikel 5588 von WARCO - Fall protection tile (210 cm fall height), Farbton Anthracite in der Abmessung 500 x 500 x 65 mm.

Anthracite (active)
Brick red + 0,80 €
Chocolate brown + 2,30 €
Grass green + 2,30 €
Slate grey + 2,30 €

Format 500 x 500 x 65 mm

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

210 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 210 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The mix of rubber granulate (irregularly formed rubber grains) and buffing dust (fibrous rubber particles) is ideal to manufacture particularly dimensionally stable and abrasion-proof products with fine-structured surface. The material is obtained from car tyres and contains mainly a high-valuable mix of natural rubber (NR) and Styrene-Butadiene Rubber, short SBR. The material properties of the WARCO preform largely correspond to those known from SBR.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 50 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound base course or on a plastic honeycomb grid. Please take note of the laying instruction.