Wall protection tile FS "Anthracite"

7,90 €

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
31,60 € / 4 piece / m²
(3,85 kg / piece)

EAN: 4251469305267 | Item no.: 0526

The handy wall protection tile protects against damage that could occur at hitting or bumping against it. Typically, wall protection tiles hang on the walls or pillars in the car parks or garages at the height of the bumper of the car. However, also in the industry and trade, where hand carts and forklift trucks are driven, the wall protection tiles absorb the kinetic energy at bumping (also without paint damage) and dissipate it. That's why the wall protection tiles are profitable from the first bump on.

The effect of the carefree wall protection tile is based on the favourable interaction of the PU bound rubber granulate and the progressively damping mat profile. The wall protection tile is directly stuck on the protected surface or on a base plate (plywood, galvanised sheet metal, etc.). The base plate can be removably mounted on the wall by means of hidden hooks. The wall protection tile cannot be screwed on directly.

The product data sheet to print

Wall protection tile von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 500 x 25 mm. Produktfoto von Artikel 0526 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0526, Wall protection tile, Format 500 x 500 x 25 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0526 - Wall protection tile im Farbdesign Anthracite. Abmessungen 500 x 500 x 25 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0526 - Wall protection tile im Format 500 x 500 x 25 mm.

Typische Verlegung oder Einbausituation für den Artikel 0526 von WARCO - Wall protection tile, Farbton Anthracite in der Abmessung 500 x 500 x 25 mm.

Anthracite (active)
Brick red + 0,70 €
Chocolate brown + 1,30 €
Grass green + 1,30 €
Slate grey + 1,30 €

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - in the open air and in buildings

For applications in the open air and under roof. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

Lateral Connecting Pins - Plastic Dowels

On two sides - between the individual rows of tiles - the tiles are connected with side connecting pins (plastic plugs). The installation must be staggered, i.e. the rows of tiles are staggered by half a tile and the edges of one tile are aligned with the centre of the tile below (T-joint). In this staggered pattern, each tile is connected to 2 tiles in the row above and 2 tiles in the row below by connecting pins. These pins prevent the tiles from moving sideways, but do not prevent them from drifting apart along the longitudinal axis of the plastic plugs. For this reason, the tiled surface must be enclosed by walls or recessed kerbs.

Structure of the underside

The underside of the slab features an inverted pyramid toe structure. These pyramid studs, approximately 15 mm high, are designed to enhance the weather resistance, dimensional stability and shock absorption properties of the slab, while facilitating efficient water drainage for outdoor use. The tiles can be installed on solid substrates (concrete, asphalt, interlocking paving, tiles, etc.), roofing membranes or plastic lawn grids. Installation guidelines must be followed.

Compressive point-load strength

3 / 5

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances.

In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.