Shop
Terrace covering von WARCO im Farbdesign Anthracite mit den Abmessungen 1000 x 1000 x 30 mm. Produktfoto von Artikel 3336 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3336, Terrace covering, Format 1000 x 1000 x 30 mm, Farbe Anthracite.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3336 - Terrace covering im Farbdesign Anthracite. Abmessungen 1000 x 1000 x 30 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3336 - Terrace covering im Format 1000 x 1000 x 30 mm.
Typische Verlegung oder Einbausituation für den Artikel 3336 von WARCO - Terrace covering, Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.
Beispielhafte Verlegung für den Artikel 3336 von WARCO - Terrace covering, Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.
Terrace covering von WARCO im Farbdesign Anthracite mit den Abmessungen 1000 x 1000 x 30 mm. Produktfoto von Artikel 3336 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 3336, Terrace covering, Format 1000 x 1000 x 30 mm, Farbe Anthracite.
Großaufnahme vom Verbindungssystem von WARCO-Boden 3336 - Terrace covering im Farbdesign Anthracite. Abmessungen 1000 x 1000 x 30 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3336 - Terrace covering im Format 1000 x 1000 x 30 mm.
Typische Verlegung oder Einbausituation für den Artikel 3336 von WARCO - Terrace covering, Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.
Beispielhafte Verlegung für den Artikel 3336 von WARCO - Terrace covering, Farbton Anthracite in der Abmessung 1000 x 1000 x 30 mm.

Terrace covering TZ "Anthracite"

EAN: 4251469333536 | Item no.: 3336

The carefree, elastic terrace covering provides a special feeling of comfort - the slabs absorb impact, vibrations and noise and are pleasant to the touch. They insulate against ground cold and dry quickly after the rainfall.

The large-sized slabs can be easily laid on the base course during the renovation or reconstruction of a terrace - without glue and screws. They neither burst nor work loose. The cost-effective terrace covering is resistant against decaying, ripping, breaking and splintering. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

Colour
Dimensions
1000 x 1000 x 30 mm 1000 x 1000 x 40 mm
Type or design
TZ (All-round puzzle joint - slightly rounded edges - strongly profiled underside) HZ (concealed, half-height puzzle joint - slightly rounded edges - strongly profiled underside)
  • 44,20 € / 1 piece / m²

  • Plus delivery costs

    (22,28 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour Anthracite A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

material The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A drainage system consisting in 4 mm deep drainage channels across the elements and about 15 mm deep hemispherical domes is formed into the bottom side of the tiles. The tiles can be laid on almost every workable base course, also unbound. Please take note of the laying instruction.

Characteristics

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and easily laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.